Let me try to answer you in the following way.

I would like to home in on the following issues.

I must say I've never heard any of the following.

Have you ever done any of the following things to your hair?

The following information may help answer some of these questions.

As a matter of fact, she came to my office the following day.

He tried to work out some kind of plan for the following day.

The following day, late in the morning, they set off once more.

I had quite a bit to think about in the following days.

Perhaps war would come in the following summer of 1938.

The test on the play was to be given the following week.

The following day the women are still with the men.

Still, the following companies might be in a better position than most.

He came for her at half past one the following day.

In the next few years, the following important things also took place.

Instead, they could make an early start the following morning.

But by the following morning, my mind was made up.

The way in which I finally cut off with one was the following.

The next time possible would be at four the following morning.

I should have something for you by the following day.

The following is what happened a couple of weeks ago.

Some of his results are given in the following table.

The new middle school and two high schools will open the following year.

By the following day, he was back to full health.

The following morning, he was found dead at age 51.

'Severe haemorrhage will also result in an increased filtration fraction.'

The filtration fraction is the amount of plasma which is actually filtered through the kidney.

This would be reflected by a high filtration fraction, showing that the kidneys have to do more work with the fluid they are receiving.

Diuretics such as loops and thiazides decrease the filtration fraction.

Because the filtration fraction has increased, there is less plasma fluid in the downstream peritubular capillaries.

Compare to filtration fraction.

The filtration fraction, therefore, represents the proportion of the fluid reaching the kidneys which passes into the renal tubules.

No significant alteration of glomerular filtration rate, effective renal plasma flow, total renal resistances, or filtration fraction was observed between or within the groups.

Catecholamines (Norepinephrine and Epinephrine) increase the filtration fraction by vasoconstriction of afferent and efferent arterioles, which is possibly activated by alpha 1 adrenergic receptors.

Proteins present in the gel filtration fractions in the high molecular weight range (fractions 13-17) were separated by SDS-PAGE followed by silver stain.

In renal physiology, the filtration fraction is the ratio of the glomerular filtration rate (GFR) to the renal plasma flow (RPF).

Our observations that the drop in urinary albumin excretion correlated with the changes in filtration fraction but not with the drop in blood pressure are consistent with the second possibility.

The predominant role of intraglomerular capillary pressure reduction is supported by the correlation between changes in urinary albumin excretion and in filtration fraction, but filtration fraction did not vary, a finding consistent with previous reports.

The filtration fraction was calculated by dividing glomerular filtration rate by effective renal plasma flow, and total renal resistances by dividing the mean arterial pressure (obtained by an automatic device during tracer infusion) by effective plasma flow.

The device's design requirements would require the filtration fraction in the glomerulus to vary between 15%-20%, or the filtration reabsorption in the proximal convoluted tubule to vary between 65%-70%, and finally the urea concentration in urine (collected at one of the two outlets of the device) to vary between 200-400mM.

Fill factors for several types of material are listed below.

In other types of cable, such as twin lead, the fill factor can be much smaller.

Most of this loss comes in the fill factor of the cell.

Increase of filling factor by matching the probe to the sample volume.

It was also concluded that the morphology change led to an improved fill factor.

The filling factor of the lower magnetosphere with such solitary structures is about 10%.

The filling factor is the fraction of occupied Landau states at the ground state energy.

The result is lower headroom, without affecting fill factor.

The fill factor of superconductor is about 35%.

In the past this effect has been used mainly against extragalactic sources where, however, the question of beam filling factors limits the results.

PSCs also still suffer from low fill factors (typically below 70%).

But the drawback of using hexagonal pixels is that the associated fill factor will be less than 82%.

The fill factor is directly affected by the values of the cell's series and shunt resistances.

We describe the effects of such bulbs on the field components, the frequency, the quality factor, and the filling factor.

The hexagonal lenses provide an area filling factor of 100% and project onto the sky in an elliptical arrangement.

Second, contact resistance between each layer in the device should be minimized to offer higher fill factor and power conversion efficiency.

Microlenses can bring the fill factor back up to 90 percent or more depending on pixel size and the overall system's optical design.

In addition, single layer PV devices notoriously have a poor fill factor.

Recombination losses make up another portion of quantum efficiency, V ratio, and fill factor.

Furthermore, the injection-level dependence of the bulk lifetime resulted in decreased fill factors.

The right hand side is thus interpreted as describing composite fermions at filling factor .

Recombination losses are accounted for by the quantum efficiency, V ratio, and fill factor values.

Another defining term in the overall behavior of a solar cell is the fill factor (FF).

Devices of this configuration have been produced with a fill factor of 69% and an efficiency of 15%.

Note that the fill factor and therefore are somewhat dependent on the width of the trace compared to the thickness of the board.