Annealing can also take place at lower temperatures, however the process takes a longer amount of time.

Thus, full annealing of any potential mechanical stress is necessary.

After the annealing process the material can be cut to size, drilled or polished.

The next day, to carry out the annealing, the operators increased the power to the reactor.

Annealing is the heat-treatment used to make the metal soft again.

There are many other approaches, such as simulated annealing, that can be taken to explore the policy space.

Forging continued until the steel was cold, producing some central annealing.

Two-story ovens were used for the annealing of the pottery.

Prolonged annealing at 1400 C is then carried out to remove any strain.

However, proper optimization of the growth process allows to avoid the annealing.

Annealing of pre-machined parts before final finishing is an alternative.

Such substrates cannot survive the high temperatures experienced during traditional annealing.

Annealing of vacancies changes diamond color from green to yellow-brown.

Annealing is also done in forming gas, a mixture of hydrogen and nitrogen.

Annealing is the process of heating the steel to a sufficiently high temperature to soften it.

High carbon strip steel requires additional annealing and cold reduction operations.

The major breakthrough came from improvements in post-growth annealing.

Annealing is a process of slowly cooling glass to relieve internal stresses after it was formed.

Then you might get 99% conductivity with simple annealing.

Yet another method is oxidative annealing of white lead:

Simulated annealing can be used as well.

It is desirable to use a cooling schedule to produce convergence: see Simulated annealing.

Annealing is a crucial step in forming bulk parts, due to high thermal expansion of the material.

However, there is no reason to think that the various proposals to use simulated annealing for inference described above were not independent.

The main goal of process annealing is to produce a uniform microstructure.

The pistol had become a part of his hands, annealed to them.

The thought of going back to a strip once annealed had never occurred to him.

The metal there would be annealed by the heat of his torch.

"See how this penny is annealed to the back of the fuse?"

Then when you heated it the penny the metal was annealed.

Since the base of the case must be hard, it cannot be annealed.

The plates are annealed for approximately 10 hours and then allowed to slowly cool.

During this process the piece becomes very hard and has to be annealed several times, then worked again until the final shape is achieved.

Nightmares of fire had annealed him to his purpose.

They are then annealed again to remove any strain hardening.

The music is annealed by his time here.

The fever which threatened to paralyze her could only be annealed in fire.

If the metal is annealed it will sink in around the indentation.

Float glass is annealed during the process of manufacture.

The glass is then annealed and cut into 7 to 10 foot (2 to 3 m) cylinders.

A different set of eight wafers are annealed together.

Her mouth fused with his; their bodies were sealed and annealed.

These were further drawn and then dried and annealed at about 260 degrees.

The graphite had to be placed in a hot zone, annealed and then pulled back out for testing.

The obtained glass is usually annealed to prevent breakage during processing.

If not, they are irradiated by high-energy particles and annealed.

And the zinc alloy is probably the bulk metal which was annealed.

Brittle wire that has not been annealed may snap during the drawing process.

In order for the copper to be worked to any extensive degree it must be annealed.

The material is then annealed to relieve stress that was caused by the machining.