Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
The pistol had become a part of his hands, annealed to them.
The thought of going back to a strip once annealed had never occurred to him.
The metal there would be annealed by the heat of his torch.
"See how this penny is annealed to the back of the fuse?"
Then when you heated it the penny the metal was annealed.
Since the base of the case must be hard, it cannot be annealed.
The plates are annealed for approximately 10 hours and then allowed to slowly cool.
During this process the piece becomes very hard and has to be annealed several times, then worked again until the final shape is achieved.
Nightmares of fire had annealed him to his purpose.
They are then annealed again to remove any strain hardening.
The music is annealed by his time here.
The fever which threatened to paralyze her could only be annealed in fire.
If the metal is annealed it will sink in around the indentation.
Float glass is annealed during the process of manufacture.
The glass is then annealed and cut into 7 to 10 foot (2 to 3 m) cylinders.
A different set of eight wafers are annealed together.
Her mouth fused with his; their bodies were sealed and annealed.
These were further drawn and then dried and annealed at about 260 degrees.
The graphite had to be placed in a hot zone, annealed and then pulled back out for testing.
The obtained glass is usually annealed to prevent breakage during processing.
If not, they are irradiated by high-energy particles and annealed.
And the zinc alloy is probably the bulk metal which was annealed.
Brittle wire that has not been annealed may snap during the drawing process.
In order for the copper to be worked to any extensive degree it must be annealed.
The material is then annealed to relieve stress that was caused by the machining.