mouldboard BrE technical
moldboard AmE technical

In frustration Leon began to tinker with an old mouldboard plough.

There are five major parts of a mouldboard plough:

They were first developed to hold replaceable ploughshares onto the mouldboard of iron ploughs.

The basic plough, with coulter, ploughshare and mouldboard remained in use for a millennium.

Between the mouldboard and the coulter are two golden pilgrimage sticks crossed through a silver shell.

Either a mouldboard plough or a chisel plough will be used for this operation.

(On ploughs the curved mouldboard both cuts and turns the soil.)

Curved 10mm thick mouldboard for strong cuts at the correct angle, and high clearance for greater capacity.

First is the wide spread adoption of "inversion" tillage using mouldboard and disc ploughs.

Half-crouched, his arms wide to the plough handles, a man stalks them as they shear from the mouldboard.

Mouldboard plowing and harrowing are usual practices prior to caper plant establishment.

Another notable feature is the relatively short mouldboard, which lessens the amount of draft force necessary to pull the plow.

The ploughshare spread the cut horizontally below the surface, so when the mouldboard lifted it, a wider area of soil was turned over.

The reversible plough has two mouldboard ploughs mounted back-to-back, one turning to the right, the other to the left.

Curved 10mm mouldboard, reinforced with heavily gussetted corners for strength where it counts and higher clearance.

Dozer mouldboard reskins, bucket wear edges fitted and floor or side plate damage repairs.

For example, the use of sod turning, fertility destroying, mouldboard plows is almost unheard of there now.

Various graphs are used to find the effect of mouldboard shape, ploughing speed, compaction and soil type on plough draught.

The holding force is the weight of the sod, as it is raised and rotated, on the curved surface of the mouldboard.

A blue shield as background has a silver mouldboard with coulter hovers over sickle lying horizontally.

The landside would have been attached to the wooden plough structure supporting the curved mouldboard on the other side, that turned the sods.

Mouldboard ploughing to a depth of 15 cm (6") followed by thorough cultivation is recommended before planting any crop.

By the Han period, the entire ploughshare was made of cast iron; these are the first known heavy mouldboard iron ploughs.

Losses of nitrate-nitrogen in water draining from under autumn-sown crops established by direct drilling or mouldboard ploughing.

In part this is linked to technological developments, such as the mouldboard plough, that made life in once undeveloped areas more bearable.

His team had all it could do to pull the moldboard through it.

That was a moldboard, and it was characteristic of this particular time.

One is that there are times when one needs to use something like a moldboard plough.

Additionally, the application of the moldboard plow in the 9th century helped cultivation.

Hose Guards for the back of the moldboard.

As the cylinder length changes, the moldboard tips.

Traditionally, American croplands have been tilled with the moldboard plow.

Many combinations of moldboard size, shape and wear materials customize each basic blade for the conditions it will work in.

Grader moldboard to have 3/4" bolt size drilled for standard blades.

The moldboard plow is invented in eastern Europe.

Here we have attached ends of the push arms to trunnion balls and freed the moldboard to move as required.

Full face moldboard liners to increase puncture resistance.

Improvements in farming machinery during this era included the moldboard plow and watermill.

It was in 1837 that the first steel plow with a self-scouring moldboard was invented.

The carruca also bore a coulter and moldboard.

Malcolm Locke created a moldboard of chilled cast iron that scours best with the least friction.

Behind Themphi followed teams of oxen with knife-edged but deep moldboard plows.

Rich families who owned oxen and large heavy moldboard iron plows greatly benefited from this new system.

If wisely used on soil in good tilth, the moldboard plow need not create problems and it is still useful to turn a heavy sod.

As the cylinder changes length the only movement left is the the rise and fall of the arm and moldboard at the cylinder end.

I promised Fentor an iron moldboard plowshare.

In the moldboard plow system however, the seedbank was more uniformly distributed over depth and was larger than the other systems.

Traditional ploughs turn the soil over in one direction, with the ploughshare and moldboard to the right (see Single-sided ploughing).

Moldboard liners, additional side wear materials and larger cutting edges are often added for work with abraisive materials.

This may follow primary tillage (if any) by moldboard plows or chisel plows.