Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
In most indicating instruments, the accuracy is guaranteed to a certain percentage of full-scale reading.
Most common application is as a null indicating instrument in AC bridge circuits and current comparators.
Please note that indicating instruments must comply with the requirements of 47 CFR Section 73.1215.
The later machines used as little as 50 volts and 50 mA, used with amplified indicating instruments.
The model base quantities varied by manufacturer and date of design; as amplified indicating instruments became more common, lower base quantities were feasible.
The indicating instruments were of the crudest construction, consisting of two voltmeters connected by "pressure wires" to the centre of electrical distribution.
Tablature (or tabulature, or tab for short) is a form of musical notation indicating instrument fingering rather than musical pitches.
Laboratory investigations of the stability of multiple-machine systems were constrained by the use of direct-operated indicating instruments (voltmeters, ammeters, and wattmeters).
The trouble was later traced to a faulty wiring harness to the artificial horizon and attitude indicating instruments, which had an intermittent short circuit due to a pinched wire.
A: A station, attended or unattended, must establish suitable monitoring procedures of its equipment and maintainance schedules for the station and indicating instruments to ensure the equipment is operating properly.
This second version was a remote maritime compass device, consisting of ampermeters as the indicating instruments located in different parts of the ship, resistant to magnetic forces or magnetic masses in their vicinity.
Designs giving decade or binary steps are popular, the latter enabling an indicating instrument connected to the output always to operate at a substantial fraction of full scale as the input signal changes, with attendant reading accuracy advantage.
The operating frequency was chosen to be high enough to allow high-quality inductors and capacitors to be made, and to be compatible with the available indicating instruments, but not so high that stray capacitance would affect results.