contactor

The contacts are the current carrying part of the contactor.

A rotating biological contactor is a type of secondary treatment process.

Power is controlled either by a contactor or a solid-state controller.

The current rating of the contactor depends on utilization category.

The contactor would sense whether the tram was drawing electricity from the overhead.

A contactor and electronic motor controller are typically mounted to the same plate.

A summary of contactor design principles and applications is included in a recent compilation.

In process industries a contactor is a vessel where two streams interact, for example, air and liquid.

Rewire the ignition switch so that it can turn on all the new equipment, including the contactor.

A type of relay that can handle the high power required to directly control an electric motor or other loads is called a contactor.

A contactor is controlled by a circuit which has a much lower power level than the switched circuit.

If a momentary loss of supply voltage occurs, the contactor will open and not close again until a new start command is given.

Thus, a 5-inch centrifugal contactor is one having a 5-inch diameter rotor.

The line is operated by the private contactor Eyre Bus Company.

Likewise, Glidcop has found used in relay blades and contactor supports.

When current passes through the electromagnet, a magnetic field is produced, which attracts the moving core of the contactor.

Three step contactor control system.

Unlike a circuit breaker, a contactor is not intended to interrupt a short circuit current.

A slightly more effective method is to make the contacts themselves larger, i.e., a contactor.

If the motorman kept the power on, the contactor sensed power was being drawn and the points would be set for the branch line.

A contactor has three components.

Special relay circuits, such as the 3 contactor combination, were one of the initial outcomes of these considerations.

The owner of the garbage, an Alabama contactor, has paid $6,000 a day for the use of the barge.

Their purpose is to allow the contactor to assess the extent of its maximum liability for breach, and thus obtain appropriate insurance cover.

A contactor is an electrically controlled switch used for switching a power circuit, similar to a relay except with higher current ratings.