By Easter 1991 the above were well on the way, and the wheels had also been fitted.

A 4th wheel was fitted with 5 beam apertures and 2 gobos.

A small wheel is fitted to the front of the barrel to prevent it touching the ground while being towed.

No wheels were fitted, as it was intended to use a launching rail for take-off.

The wheel can be fitted with an actual 45-r.p.m. record that works as a control surface for the spinning platter.

The rear wheels were also fitted with disk covers.

The spare wheel was fitted behind the seats, while the tool trunks were accessible from the outside.

Wooden wheels, designed by the company, could be "fitted."

The wheels were fitted with low pressure tires which allowed it to operate off grass airstrips.

Conventional front wheels and steering were used but the wheel could be fitted with skis as seen in the upper right image.