vapour condenser

The Model 0610 has the ice vapour condenser located beneath the product section within the same chamber.

The vapour condenser is manufactured form type 304 stainless steel tube.

Each bank is fitted with wheels that run in a stainless steel track located directly above the vapour condenser.

The vapour condenser is manufactured from T304 stainless steel tube in three separate circuits.

Vapours pass from the chamber into a VC8000T condenser/vapour condenser.

Two viewing ports each 200mm in diameter are provided in the doors, one each, for observation of the ice vapour condenser, and the other at shelf level.

Defrosting of the vapour condenser chamber can be undertaken while drying if desired, by closing the specimen chamber valve and selecting Defrost.

The vapour condenser is manufactured from T304 stainless steel in the form of a tapered cone to allow simple defrosting with the assistance of reverse refrigeration.

De-oiling with this solvent is generally performed in closed tanks equipped with vapour condensers where only two slots permit the entry and exit of the steel sheet or strip.

Researchers at the Institute had observed that some vapour condensers operated more efficiently than others, requiring less cooling water flow and subsequently less electrical power for the cooling water circuit.

The brewlength is 60 Brls.The Copper is of unusual design as it has a Vapour Condenser to stop the escape of steam and any aromas to the outside of the brewery.

The Institute obtained funding through the Sustainable Energy Innovation Fund to analyse the operation of several existing vapour condensers at sugar factories, to develop an improved condenser design to increase efficiency and to monitor the performance of two new condensers built with the new design.