solvent-based adhesive

Nor is glue-sniffing a new issue for the makers of solvent-based adhesives.

When using solvent-based adhesive, wear an adequate face mask and provide plenty of ventilation.

When laying a floor with a solvent-based adhesive, open all the windows and doors in the room to get maximum ventilation.

Solvent-based adhesives also dry out over time.

• Non organic solvent-based adhesives are used in manufacturing.

Meanwhile, solvent-based adhesives will continue to lose ground to water-based and hot-melt types.

The only option for reducing evaporative emissions is to change to water-based or other solvent-based adhesives.

A high heat resistant solvent-based adhesive.

In industrial use, hot melt adhesives provide several advantages over solvent-based adhesives.

Solvent-based adhesives are a mixture of ingredients (typically polymers) dissolved in a solvent.

Epoxy, instant glue, airplane glue or other solvent-based adhesives.

The product is usually reinforced and depending upon manufacturer, seams can be heat welded or adhered with a solvent-based adhesive.

And the Canadian environmental objectives are not being met because solvent-based adhesives are being used instead of the proposed water-based adhesives for these applications.

The VOC emissions from solvent-based adhesives result from the evaporation of solvents in the adhesive.

A flooring contractor was found semi-comatose in an unventilated room where had been working laying vinyl flooring and using a solvent-based adhesive.

Solvent-based adhesives are usually applied using specialized spray guns such as in the fabrication of foam products cut from polyurethane foam stabstock or other materials.

The product portfolio includes water and solvent-based adhesives, cementitious powders, grab adhesives and bitumen-based weatherproofing products.

HMAs do not lose thickness during solidifying; solvent-based adhesives may lose up to 50-70% of layer thickness during drying.

To further reduce VOCs, material substitution trials are being conducted to replace a solvent-based adhesive with a 100% solids adhesive that contains no solvent.

There are two types of adhesives that harden by drying: solvent-based adhesives and polymer dispersion adhesives, also known as emulsion adhesives.

Then the sheet latex is cut out on a flat board, by hand: lastly latex glue (generally rubber cement solvent-based adhesives) is used to join seams together.

Pressure-sensitive label adhesives are commonly made from water-based acrylic adhesives, with a smaller volume made using solvent-based adhesives and hotmelt adhesives.

When specifications require the use of solvent-based adhesives, the company's manufacturing process recaptures and destroys air-borne toxins through regenerative thermal oxidization (RTO), greatly reducing emissions.

For the high reduction option, it was assumed that 50 % of the DCM-based adhesives are replaced with water-based products and the remainder would be replaced with flammable solvent-based adhesives.

For example, instead of rubber cement, epoxy, instant glue or solvent-based adhesives, which contain volatile toxins, young children should use glue sticks, double-sided tape or any adhesive, like school pastes and white glues, bearing a "CP" or "AP" label.