solenoid valve

Multiple solenoid valves can be placed together on a manifold.

Solenoid valves are used in dentist chairs to control air and water flow.

Oil flow to the variator is controlled by a solenoid valve.

Solenoid valves are the most frequently used control elements in fluidics.

In each fuel line, there are two spring-loaded solenoid valves that close the lines.

The same objective must be accomplished by a solenoid valve on a front loader.

Solenoid valves are also characterized by how they operate.

To generate those forces, an internally piloted solenoid valve design may be possible.

Most recent models regulate the pressure by rapidly opening and closing solenoid valves.

The solenoid valve should operate and water issue from the hosepipe for a time set by control VR2.

A direct acting solenoid valve typically operates in 5 to 10 milliseconds.

The 2 way solenoid valves can be either normally closed or normally opened.

The weight rested on a lever controlled by a pneumatic solenoid valve.

In the paintball industry, solenoid valves are usually referred to simply as "solenoids."

The filling pipe is attached to a small ( ") solenoid valve.

The timing of the valve is controlled by an electronic signal sent to the solenoid valves.

Each injector has its own pumping element, and in the case of electronic control, a fuel solenoid valve as well.

Solenoid valve designs have many variations and challenges.

The emergency brake hydraulic solenoid valve had been installed according to the design (as normally open).

It also makes sure that the extra load of the solenoid valve does not cause problems due to sudden voltage drops.

The faulty solenoid valve on the cathode machine vacuum pump was replaced.

In some solenoid valves the solenoid acts directly on the main valve.

Domestic washing machines and dishwashers use solenoid valves to control water entry into the machine.

The top of the vessel is closed by a solenoid valve of the same dimension like the fuel tank.

Each zone has a solenoid valve on it that is controlled via wire by an irrigation controller.