slip clutch technical
slip coupling technical

Unfortunately he got a bad start in the race due to a slipping clutch and was only 10th going into the first corner.

Tried slipping clutch to attempt full throttle but did not do what we wanted.

Gears include an internal slip clutch to prevent damage during play.

On lap 66 he retired with a slipping clutch.

Or, to change the metaphor, a weak conviction acts on faith like a slipping clutch.

Caracciola struggled with a slipping clutch that gave in on lap 53.

Gurney may have been tempted to challenge for the lead again, but a slipping clutch caused him to think better of it.

An alternative solution to a slipping clutch is to fit a high-clamping force pressure plate.

If a slipping clutch is incorporated, for blind holes, it can cause premature wear.

About one year ago I experienced a problem that felt like a slipping clutch, but only in fourth or fifth gear when accelerating hard.

In the early evening Pridmore pitted one lap ahead of schedule with a slipping clutch.

And he had let the clutch out against the brake to test for slipping clutch plates.

This is prevented with a slipping clutch device.

Several types based on control of the supply voltage or mechanical devices such as slip clutches were developed.

Place vehicle in drive or slip clutch.

A 4th slip clutch disc and plate has been added to extend the life of the main drive clutch.

The prop speed is generally limited using a slipping clutch to prevent excessive rotation and premature failure.

To prevent this, a slipping clutch device is used on the mainspring so it cannot be overwound.

Most of these consist of a slipping clutch and some kind of rocking device.

Farina pulled up at Abbey curve after 75 laps with a slipping clutch and his engine on fire.

Adjustable slip clutch (to minimise drive damage if the blades hit a solid object)

The feed auger is protected by an audible slip clutch on the feed drive.

A smell like rope burning may indicate a slipping clutch, binding brakes or that the handbrake's still on.

Adjustable slip clutch to protect the winch from overloading (1000 kg capacity only).

The machine is suitable for continuous commercial use as it features robust frame, heavy duty blades and a slip clutch to protect the transmission.

- and he knew about electromagnetic slip couplings.

The use of slip couplings and a firmware watchdog increase the safety of this manipulator.

It will be necessary to remove a minimum pipe length of 1200 mm to effect the correct installation of the ABS RRJ slip coupling.