screened cable

If the run is near to mains cables it would be best to use screened cable.

In the basic set-up, the machine-to-machine video connection is made by screened cable.

Disconnect the inner of the screened cable from the rear post of the two.

Tuesday dawned, I rewired the speedo, using screened cable, but it was no better!

By keeping output impedances low, Serge largely avoided the need for screened cables.

Four Core overall screened cable.

The mimic is connected on to the slave loop via a four core screened cable and receives it's power from the Master.

Solder a screened cable to a connector (audio).

When screened cables are used, the shields are connected to the overall screens of the cables.

Connections are made to the VS 300 by a factory-fitted length of flame-proof six core screened cable.

RS232C - Single wire transmission, via screened cable.

C is the additional flammability rating that presently is mandatory for halogen free screened cables.

Use screened cables where possible and avoid dry joints by applying the solder to the iron and wire/components simultaneously.

High Quality fully screened cable, all pins connected and with Nickel-Plated Connectors.

Some multicore cables designed for unbalanced audio are made, and they contain a number of single-core screened cables.

All of our heads are supplied attached to the stainless steel brackets, complete with screened cables and connectors, or flexible printed circuits according to model.

Forty-five percent of the districts had cable television in at least seven schools; half the districts screened Cable News Network for instructional purposes.

Alternatively, the phono sockets can be mounted to the inside of a standard case, and wired down to the PCB with single screened cable.

The latter screened cable also acts as superior quality indoor aerial to VCR/Satellite/TV.

Verified and Powersum tested up to 200 MHz, available as an unscreened or screened cable in four pairs with various jacket/sheath options.

Due to the low output impedance of the mic preamp, screened cable is not necessary and ordinary 2 core speaker cable, or bell wire may be used.

In its long path from here to ear the audio passes through at least a hundred op-amps, dozens of connectors and several hundred metres of ordinary screened cable.

You will need a screened cable about one metre (one yard) in length and with the correct plug terminations; these can be bought ready made-up at hi-fi stores.