Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
They have been working very hard getting the ring beam started.
You can now attach the ring beam to the top of the frames.
Ring beam is almost our last big Job (obstacle wise) to overcome.
The infirmary walls had to be held in place by a concrete ring beam.
The cable system also serves as tension rods for the ring beam.
The tower has been stabilised with a massive internal ring beam.
The eye bolts should be fixed firmly into a concrete ring beam.
Steel framed construction with a ring beam that supports the roof.
The walls of this building support the wooden roof structure using a reinforced-steel ring beam.
These columns terminate a third of the way up where they support the ledge-like ring beam.
However, it was determined that this was the safest way to bring down the remaining ring beam structure.
The walls were reinforced using ring beams around the whole structure to prevent outward displacement during an earthquake.
In Arua we were happy to see that the church building is at ring beam level, and they hope to finish by December.
The dome is supported on 18-m-long steel piles and a series of steel ring beams.
Wed. 25 Concreting ring beam during the day.
The ring beam is to be re-assembled under the box before moving, to increase the rigidity of the box.
Daytime lighting is provided by natural roof lights, so that the light from outside comes from the ring beam walls.
He said some local stitching would be needed across the cracks, but a ring beam would not be required.
The 1980 powerhouse is a cavity walled brick structure, with a reinforced concrete floor and a ring beam.
A reinforced concrete foundation, or "ring beam", is constructed, defining the shape of the base of the structure.
Plenty of ring beam work.
A new chimmney was supported onto reinforced concrete ring beams and bored piles constructed within the existing building.
Ring beam to protect the pit (optional)
The main ring beam is also used to create neutrino beams for analysis at the Kamioka detector, located approximately 300 km to the west.
Construction techniques include reinforced walls, rigid wooden ring beams, corner bracing, and strategic door and window location.