Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
For accuracy, take measurements at two points along each side of the rabbet.
This type of door has a rabbet or recess on the back side around all four edges.
The rabbet allows the boards to overlap in this area.
Then there was the awesome responsibility of rabbet selection.
What if I had chosen the wrong rabbet?
When I started the process I had no idea what "rabbet" meant.
A rabbet can be used to form a joint with another piece of wood (often containing a dado).
He said not to worry about rabbets.
Press the strand neatly into a section of the rabbet, along the inside corner running the length of one side.
Then, a repair patch, some 1.25 m long, was manufactured with similar rabbets so both parts would perfectly match.
Measure between the outside edges of the rabbet - from top to bottom and from side to side.
Closer analysis of the rabbets in the hull's frame suggest that the mast step had been moved up to three, and possibly four times.
The lip extends usually about a quarter of an inch past the edge of the rabbet.
To patch it, a larger portion of the hull was worked away and a rabbet was cut around the edges.
The word rabbet is from Old French rabbat, "a recess into a wall."
The dog in residence at the Rabbet Gallery here is a beagle named Spencer.
Be careful not to gouge the grooved surface - called the rabbet - against which the glass rests in the sash.
When viewed in cross-section, a rabbet is two-sided and open to the edge or end of the surface into which it is cut.
In carpentry, a reveal is a feature resembling a rabbet, but constructed of separate pieces of wood.
Rabbet - A rabbet joint is one of the simplest joints used on the show.
Nobody mentioned rabbets.
Then press the points approximately half their length into the sides of the rabbet, using the tip of a screwdriver or putty knife.
Sacke and Sugar, "like a black Rabbet"
The keel, or keelplank, was only slightly thicker than the adjacent garboards and had no rabbet.
February 5 - Michael Rabbet, English Bible translator (born c.1562)