polymer resin

That particular polymer resin is injected into a mold, under heat and high pressure.

Polymer resins may be used as a substrate for solid-phase.

For example, the Table below shows the polymer resin codes (plastic) for a country.

The stuff's polymer resin, it solidifies hard as steel.

The hand was, in fact, an intricately detailed synthetic polymer resin sculpture.

Using ultraviolet light to cure the polymer resin.

He said I was an unsaturated hydrocarbon polymer resin.

The extruding step is generally carried out at a temperature higher than the melting point of the polymer resin.

The rise was primarily from fiber, but also other inputs including polymer resin and oil-based materials.

The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together.

The polymer resin film, which is applied to glass, has a microscopic structure that looks like miniature louvers.

It's ground levallite mixed with a polymer resin.

Any hydroxyls are the result of incomplete conversion to the amine-terminated polymer resins.

The polymer resins are first mixed with, paraffin oil, antioxidant and other additives.

Polymer resins constitute 60 percent of the cost of production of packaging materials.

Each layer is impregnated with a synthetic polymer resin that cures and hardens.

Nyalic is a crystal clear, polymer resin coating.

In 1955, Levinson developed a quick-drying, water-emulsified acrylic polymer resin.

The clear parts of the shell seem to be a polymer resin," Ra-Havreii added a few moments later. "

The amine-terminated polymer resins will not have any intentional hydroxyl moieties.

This is attached to a pump that draws air into an odor trap made of a porous polymer resin.

Instead of a traditional grease or oil, the product, called Centrac, is a polymer resin that contains friction-modifying materials.

Hi-Macs is solid all the way through and polymer resins add extra strength to make the surface exceptionally non-porous.

The advantage of shape memory polymer resins is that they can be shaped and reshaped repeatedly without losing their material properties.

 DuPont plans to increase monomer and polymer resin capacity by more than 50 percent.