Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
These are simply for appearance, not being any kind of pole piece.
These pole pieces are usually flush with the housing surface.
How do these change the sound, as compared with, say, the normal pole pieces or screws?
A second pole piece in turn surrounds the voice coil.
Pole pieces take many shapes and forms depending on the application.
The traditional material for pole pieces was soft iron.
The second reason is that the pole pieces can make tuning and placement of the strings much more difficult.
One hundred and eighteen acres, give or take a pole piece or two.
Pole pieces are used with both permanent magnets and electromagnets.
The adjustable pole pieces pick up the magnetism from the magnets.
As these plants were necessarily large, they could also use large-diameter dynamos with many pole pieces.
The second reason is that some strings have naturally higher output, so a lower magnet pole piece can compensate for this.
In the case of a permanent magnet, the distinction between the magnet itself and the pole piece or pieces is more clear cut.
Have one of Warren's gang fit the busted pole pieces up with a return-magnetic frame so that the field will be complete.
The field coils now moved into short, squat internal coils around the pole pieces themselves.
The original had 6 Alnico slug pole pieces.
Variable temperature measurements can be made by placing the sample in a cryostat between the pole pieces of the magnet.
A pole piece attaches to and in a sense extends a pole of the magnet, hence the name.
The pole piece and backplate are often a single piece, called the poleplate or yoke.
The flanges are the pole pieces.
They have adjustable pole piece screws.
The magnetic pole pieces can be brought closer, thus making it possible to increase greatly the magnetic flux density.
The pickup's basic construction is that of a metal blade inserted through the coil as a shared pole piece for all the strings.
Note the laminations of the electromagnet pole pieces, used to limit parasitic inductive losses.
The bar-shaped magnet affects strings uniformly, without irregularities known in more traditional design with separate pole pieces.