pickup tube

They dropped Baby on its port camera and broke the color pickup tube."

At first these cameras used pickup tubes, and the recorders were of the removable type.

The miniature laser was mounted over her right ear, with the pickup tube right above it. '

Older machines may have a vidicon type pickup tube, with direct fiber-optic coupling to the image intensifier.

It also features a cast crankshaft, no oil squirters, a plastic oil pickup tube and less aggressive camshafts.

Others include the tubes used in oscilloscopes, radar displays, and the camera pickup tubes described in this article.

The camera electronics shrank, and CCD imagers replaced the pickup tubes.

The process of moving the electron beam of a pickup tube or a picture tube across the target or screen area of a tube.

Also known as a water cans, they are commonly converted into makeshift CAFS extinguishers by drilling two 1/8-1/16 inch holes in the pickup tube.

With the arrival of commercially viable charge-coupled device (CCD) technology in the 1980s, first the pickup tubes were replaced with this kind of sensors.

Scanning a subject this way required a completely dark stage, and was impractical for production use, but gave early researchers a way to generate live images before practical imaging pickup tubes were perfected.

In 1935, he left Cornell to take a position at RCA to work on both theoretical and experimental work on secondary emission, pickup tubes, and field electron emission.

If the oil in a wet sump is forced to one side in the oil pan the oil pump pickup tube can be temporarily uncovered leading to a loss of oil pressure.

In older video cameras, before the mid to late 1980s, a video camera tube or pickup tube was used instead of a charge-coupled device (CCD) for converting an optical image into an electrical signal.

Handheld color cameras did not come into general use until the early 1970s, and the first ones were two pieces, a camera head shoulder unit that held the lens and pickup tube section, and a backpack unit.

In color television and video cameras manufactured before the 1990s, the incoming light was separated by prisms and filters into the three RGB primary colors feeding each color into a separate video camera tube (or pickup tube).

The system's camera basically worked in reverse by projecting a light through the camera's lens onto the subject from a cathode ray tube, or CRT, mounted behind the lens (instead of a pickup tube like conventional television cameras), providing the "flying spot".

The Stage 1 engine option consisted of a more aggressive camshaft, higher compression, unique cylinder heads with larger (2.13" intake and 1.755" exhaust) valves, a specially tuned 4 barrel Quadrajet carburetor, more aggressive ignition timing,5/8 inch oil pickup tube and a higher numerical final drive.