persulfate

No catalysts were added to the persulfate, but there was a significant amount of contaminant reduction.

The persulfate and iron react underground to produce the sulfate radicals.

Ammonium persulfate is the main component of Nochromix.

Chemical etching is usually done with ammonium persulfate or ferric chloride.

The persulfate and the iron are not mixed beforehand, but are injected into the area of contamination together.

The anhydrous material is prepared using sodium persulfate:

The reaction is disadvantaged by low chemical yields with recovery of starting material and complete consumption of the persulfate.

The most common oxidant is ammonium persulfate.

Oxidation with persulfate affords a variety of polyanilines compounds.

Free radicals form from the persulfate and react with any carbon available to form carbon dioxide.

Persulfates: The dissociation of a persulfate in the aqueous phase (Figure 4).

An oxidizing agent, such as ammonium persulfate, can also be used, typically at 0 C and in darkness to control the polymerization.

Polymerization is initiated using potassium persulfate.

It is suggested that the phenol in many cases is a catalyst converting the persulfate into a sulfate.

There may be pathways distinct from that, but the result is the same, so that's a clear way to think about the stoichiometry when persulfate oxidizes.

Chemical oxidation analyzers inject the sample into a chamber with phosphoric acid followed by persulfate.

Radical initiators include potassium persulfate and hydroperoxides in combination with ferrous salts.

The term persulfate (also known as peroxysulfate) refers to ions or compounds with more oxygen than normal sulfates.

It is most frequently applied in the subsurface as sodium persulfate (NaSO).

Its main ingredient is ammonium persulfate (another strong oxidizing agent) which you dissolve in concentrated sulfuric acid.

A denture cleanser ingredient called persulfate is "the most likely cause of the problem," states the FDA's web site.

Potassium persulfate is less soluble (cfr.

Oxidation with ammonium persulfate and dilute caustic soda gives bismuth tetroxide.

Sodium persulfate (NaSO) is a chemical compound.

Oxidants include air or oxygen, ozone, and certain liquid chemicals such as hydrogen peroxide, permanganate and persulfate.