one-way clutch

The engine was offered with a gearbox reduction system that included a one-way clutch.

The second, a flywheel, was attached to the drum with a one-way clutch.

The flywheel, driven by the one-way clutch, continued to spin.

A few motors have an internal one-way clutch that allows winding with a back-and-forth motion.

The applicant should claim a sander having the combination of a one-way clutch with a reversible motor.

This is performed by two bands, two multi-disc clutches and a one-way clutch.

One-way clutches prevented rotation of the input shafts when the couplings were drained.

It features clutch to clutch shifting, eliminating the one-way clutches used on older transmission designs.

When only one of the two sources is being used, the other must either also rotate (be idling), be connected by a one-way clutch or freewheel.

During the stall and acceleration phases, in which torque multiplication occurs, the stator remains stationary due to the action of its one-way clutch.

The manufacturers of the winch identified the loss of control as being caused by the failure of the one-way clutch on the winch's drive motor.

This system incorporates a one-way clutch bearing or centrifugal force fly wheel on the handle shaft to restrict handle movement to forward motion only.

The invention lies in the combined use of a known one-way clutch and a known reversible motor in an otherwise conventional rotary sander.

Due to normal residual oil in the area, when chip plugs are removed, they often look "wet" even though the oil flow to the one-way clutch may be lacking.

The internal parts spin the opposite direction in the THM425; the helical angle of the planetary gears is "reversed" and the one-way clutches freewheel in the opposite direction, for example.

With only one hydraulic coupling filled with oil and the other three engines disconnected and their respective input shafts to the transmission locked by the one-way clutches, the single engine drove the output shaft through an effective gear ratio of 4:1.

The loss of efficiency as the converter enters the coupling phase is a result of the turbulence and fluid flow interference generated by the stator, and as previously mentioned, is commonly overcome by mounting the stator on a one-way clutch.

It is primarily known for its powertrain products, which include manual and automatic transmissions and transmission components, such as electro-hydraulic control components, transmission control units, friction materials, and one-way clutches, turbochargers, engine valve timing system components, along with four-wheel drive system components.

A trusted supplier to virtually every automatic transmission manufacturer in the world, BorgWarner Transmission Systems produces "shift quality" components and systems including one-way clutches, transmission bands, friction plates and clutch module assemblies as well as transmission solenoids, control modules and integrated mechatronic control systems.

In "braking", third gear would be locked out, and first gear would be engaged by the rear band as opposed to one-way clutch in normal drive, thus preventing free-wheeling (Volga had no one-way clutch, as 1st gear would only be manually engaged for engine-braking).