machine frame

Soft Foot is a common term used for machine frame distortion.

This unit can also be mounted either in the terminal box position or on the machine frame.

The brake housing is mounted solidly to the machine frame.

The solutions found by the system are displayed in 2D and indicate possible collisions with the tools or the machine frame.

In wind power industry nodular cast iron is used for hubs and structural parts like machine frames.

Mark the cylinder and machine frame.

The outer race of the sprag clutch is fixed to the machine frame, usually via a torque arm.

As the disks are squeezed, torque is transmitted from the hub into the machine frame, stopping and holding the shaft.

Lift the pump and reservoir off the machine frame and empty the fluid reservoir.

Educate students how to read and do detail and assembly drawings of mechanisms, machine frame and other objects.

A person received severe electric shock injuries after incorrectly wiring a machine, which resulted in the machine frame becoming live.

Noise was generated through vibration transmission from the motor pump unit to the machine frame and impacts from the valve bank.

Instead of some of the complicated braced open side machine frames, a simple plate construction may be substituted and considerable noise reduction achieved.

Platen parallelity is achieved by a hydraulic device which compensates for deformation of the machine frame.

Usually the magnetic field is bolted to the machine frame (or uses a torque arm that can handle the torque of the brake).

It was obvious to Mr. Vail early on that working with aluminum, the traditional material for tattoo machine frames, would be prohibitively expensive.

Standard features include extra high rigidity machine frame, High rigidity platens, center press toggle and platen design, and high-speed injection.

So when the armature is attracted to the field the stopping torque is transferred into the field housing and into the machine frame decelerating the load.

Inch movement - mark the cylinder and machine frame, inch and measure Crawl speed - count the number of revolutions per minute and multiply by the cylinder circumference.

The machine may have any of the following features: — The facility for the sawblade to be raised and lowered through the table. — Machine frame below the table may be open or enclosed.

A modular system of heavy-duty machine frames supports a variety of units and combination s to achieve the required results comprising solid and rubber rollers, as well as solid or electronic segmented pads.

For machine frame, read 'airframe' Pennant International is developing its Generic Flying Controls Trainer (Genfly) for the Ministry of defence, based on a framework of aluminium extrusions supplied by Alusett (see picture).

Beams are traditionally descriptions of building or civil engineering structural elements, but smaller structures such as truck or automobile frames, machine frames, and other mechanical or structural systems contain beam structures that are designed and analyzed in a similar fashion.

On the other hand, once you get the hang of it, there is real fetishistic satisfaction in unfolding the finely machined frame - every bar and bolt sliding silently into place - and in breaking it down again before entering the Metropolitan Museum or your local noodle house.