Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
The lever escapement, as used in most modern mechanical watches, avoided this problem.
Then in the 19th century both were superseded by the lever escapement which has been used almost exclusively ever since.
A small French carriage clock having an eight day timepiece movement with a lever escapement.
A jeweled watch with a lever escapement should contain at least 7 jewels.
A problem with the lever escapement is friction.
It is a challenge that has fascinated watchmakers since the 18th century, when the traditional lever escapement first appeared.
Therefore, the self-starting lever escapement became dominant in watches.
The clock has a single fusee movement with chain drive, maintaining power and a platform lever escapement.
The fourth wheel also drives the escape wheel of the lever escapement.
Later, it was realized that all the teeth from the gears could be removed except one, and this created the detached lever escapement.
New innovations, such as the cylinder and lever escapements, allowed watches to become much thinner than they had previously been.
The pallet fork is a component of the lever escapement of a mechanical watch.
Most tourbillons use standard Swiss lever escapements, but some have a detent escapement.
Since about 1900 virtually every mechanical watch, alarm clock and other portable timepiece has used the lever escapement.
Such springs were essential in modern watches with a detached lever escapement because they can be adjusted for isochronism.
The Swiss Lever Escapement has been the standard in horology for hundreds of years.
This mode of impulse is in theory superior to the lever escapement, which has engaging friction on the entry pallet.
By 1820 watches manufacture had improved and the Lever escapement had become popular, so frequent calibration was no longer needed.
Hallmarked London 1899 stock no. 1185 The 8 day duration timepiece movement with platform lever escapement.
The lever escapement, invented by Thomas Mudge in 1750, has been used in the vast majority of watches since the 19th century.
In 1791 he patented the rack lever escapement for watches, which was more accurate than the commonly used verge escapement.
The two day chain fusee movement is of exceptional quality made in the manner of a chronometer movement but with a lever escapement.
After discussions with Moritz J. Grossman he adopted the simple detached pin lever escapement.
The pallets in a traditional lever escapement have two angled faces, the locking face and the impulse face, which engage the escape wheel teeth.
In 1770 George III purchased a large gold watch produced by Mudge, that incorporated his lever escapement.