front suspension

GM at the time had a independent front suspension since 1974.

This could be a function of the very soft front suspension.

The front suspension is unique among bikes currently on the market.

In order to improve stability, the front suspension is also given new settings.

My vehicle did not pass inspection due to a front suspension issue.

The other major change vis-à-vis the 406 lay in the front suspension.

Nothing else seemed wrong, except that the mechanic had examined the left front suspension for quite a while.

The added weight of the front suspension system is also cited as a reason for ending the project.

The front suspension must also be strengthened to ensure wheels do not fall off.

This innovation permits a longer arm and makes for better control of front suspension movement.

Now attach arms from the rod to the front suspension member on both sides.

He the hit the wall on the other side of the track, which caused almost identical damage to the left front suspension.

The hood, front suspension and cradle are made from aluminum.

This car introduced the independent front suspension to the Packard line.

The poor front suspension springs can be replaced with progressive ones.

The front suspension was bolted to the front of the body.

The front suspension is a multi-link design with four individual control arms per wheel.

The front suspension was redesigned to more closely match that of the 850.

The use of dependent front suspension has become limited to heavier commercial vehicles.

The front suspension is also made of aluminum now, and its diameter was increased from 33 to 37 mm.

In order to permit this design variation, an exclusive front suspension was developed.

The front suspension is independent and the rear has a solid axle.

Mechanical investigation showed the accident was caused by a broken front suspension.

Important safety related change to front suspension lower ball joints on all cars in September 1983.

Rare for a van, it had independent front suspension.