flue pipe

Thus, there are no moving parts in a flue pipe.

I pointed out that the flue pipes had no hidden joints.

A flue pipe has two major parts, a foot and a resonator.

The diameter of a flue pipe directly affects its tone.

But with the flue pipe dislodged, the gas went into the apartments.

They are one of the most common types of organ flue pipe.

In the caldarium flue pipes were laid all through the walls.

As a result, he said, it is often necessary to install a six-inch-diameter flue pipe inside the existing chimney.

Flue pipes are common components of pipe organs.

Flue pipes may be metallic or wooden.

This is in contrast to flue pipes, which contain no moving parts and produce sound solely through the vibration of air molecules.

See wind instrument and flue pipe.

The Flageolet is an organ stop belonging to the flute group of flue pipes.

Flue pipe, the widest scale of tubes producing notes on a pipe organ.

Reed pipes are scaled according to different formulas than are flue pipes.

With edge instruments like whistles, recorders and the flue pipes of organs, the forming job is done by a smooth duct.

This particular bell's flue pipe has a design of the dragon's tail entwined around it and is topped with a lotus flower.

Flue pipes generally belong to one of three tonal families: flutes, diapasons (or principals), and strings.

String pipes are the smallest-scaled flue pipes.

A closed flue pipe with a uniform cross-section sounds an octave lower than a similar open pipe of the same length.

This is why the new guidelines require heating engineers to routinely inspect the joints between sections of flue pipe and confirm that they remain sound.

In your case, however, the incoming and outgoing flue pipes are two separate entities, and there are no hidden joints.

The metallic pipes seen mounted on top of the wooden boxes at either side of the altar are flue pipes.

I had to mix some insulating material containing asbestos with water and pack the flue pipes around the boiler with it."

The voicing, the length of the resonator, and the resonator's volume all determine the fundamental pitch of the flue pipe.