fixed jaw

Have the dealer cut threads on one end for the clamp's fixed jaw.

The area of contact for the fixed jaw should be farther from the body of the tool.

He was married to a probate lawyer named Nora, an ascetic type with a fixed jaw.

At the fifteenth floor, they were greeted by a man who resembled the people in the pits: the same lifeless eyes and fixed jaw.

The vises' fixed jaws are aligned by means of a dial indicator so that there is a common reference plane.

They resemble shorter fast-action bar clamps, except that generally the spindle is attached to the fixed jaw.

Bench clamp (for holding things to a bench top) The bench forms the fixed jaw.

The pipe cutter is a clamp-like device with one movable jaw and a round cutting wheel mounted on the fixed jaw.

These resemble fast-action bar clamps; the kind with the spindle attached to the fixed jaw, rather than to the sliding jaw, is easier to use.

These calipers comprise a calibrated scale with a fixed jaw, and another jaw, with a pointer, that slides along the scale.

Using the clamps is similar to using bar clamps except that the spindle is mounted in the fixed jaw rather than the sliding jaw.

The vise is bolted onto the top surface of the bench with the face of the fixed jaws just forward of the front edge of the bench.

The swing jaw closes, i.e., it moves towards the fixed jaw when the pitman moves upward and opens during the downward motion of the pitman.

The clamping is often done with each pair of jaws consisting of one fixed jaw and one movable jaw (hydraulically actuated), thematically similar to advanced milling vises.

Edmond waited till life seemed extinct in the body of his friend, then, taking up the knife, he with difficulty forced open the closely fixed jaws, carefully administered the appointed number of drops, and anxiously awaited the result.

The fixed jaw can withstand bending stress far better than can the movable jaw, because the latter is supported only by the flat surfaces on either side of the guide slot, not the full thickness of the tool.

The swing jaw, suspended on the eccentric, undergoes two types of motion- swing motion towards the fixed jaw due to the action of toggle plate and vertical movement due the rotation of the eccentric.

In addition, it is important when applying significant force to ensure that the fixed jaw "leads" the rotation (it follows its tip) and the movable jaw "trails" the rotation, leaving its tip behind, so to speak.

With fixed jaw and steely determination, I vowed to make a sacrifice in the name of science: to hook up several of these players, along with a name-brand unit for comparison, and spend days on end watching movies on the couch.