fan housing

The insulation should not come over the fan housing or blades.

Both the drive cage and the fan housing ship with the box, so the choice is up to you.

Return to the bathroom and press the fan housing against the ceiling so one edge is adjacent to the saw cut.

Thomas, still leaning forward, bumped his head against the ventilator fan housing.

This saw cut will serve as a guideline for tracing the outline of the fan housing.

Push the ducting and the fan housing through the hole in the bathroom ceiling.

The max cooled back pad uses air from the fan housing to cool operators and to keep them comfortable during hot days.

Usually, it's necessary to bolt mounting brackets to the fan housing before taking the unit to the attic.

As shown in Figure 1, the hub turns on a driveshaft that passes through the fan housing.

The dust build up on the fan housing is dust which has already passed through the unit - and the disk drives!

Its eastern portal is the only one of the 14 tunnel portals on the original turnpike that has no ventilation fan housing.

She shifted back and he pulled the container off, then leaned forward, careful to avoid bumping his head on the ventilator fan housing.

The fan housing was patched and the fan started, making the concrete-lined, 112 foot shaft an intake.

It will be easier to attach the insulated ducting to the fan housing before it is mounted between the joists.

The explosion blew out some stoppings and overcasts and also the side and end walls of the fan housing.

Nothing moved in the sweltering shadows except the trio at work in the repair shed, bending oblivious over a ho-crawl's opened fan housing.

The fan housing was in the centre of the roof and a low grab-rail ran the length of the hull, fore and aft.

The centrifugal fan wheel is typically contained within a scroll-shaped fan housing, resembling the shell of the nautilus sea creature with a central hole.

The first is the mechanical part, which involves cutting a hole in the bathroom ceiling and mounting the fan housing then running the exhaust duct from it to a vent in the roof.

The gas enters from the side of the fan wheel, turns 90 degrees and accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.

The cars' fan housings had provisions for air conditioning units, however, only one car, number 612, had ever been air conditioned, which the transit authority had found to be uneconomical at the time.

The cars had been nicknamed "Almond Joys" by many riders as their distinctive ventilation fan housings resembled the almonds atop the Peter Paul (now Hershey's) Almond Joy bar.

She passed wire vent grilles and fan housings making a low moaning roar, blasting hot air up and out of the air-conditioning systems below; summer was coming on, and the unseasonably hot weather this last week had turned the city-roar abruptly louder.

The following year an aft-facing Bristol-Siddeley Viper III jet engine, mounted on the rear of the decking behind the lift fan housing, supplemented the ducted-air propulsion produced by the piston engine, increasing the craft's maximum speed from 35 to 50 knots.

NTN-Bower Corporation in Macomb, IL is one of North America's most prominent producers of tapered roller bearings, fan housings, HUB and HUR units, mass weights, precision roller bearings and other related components.