dry cutting

Dry cutting has been reduced by 60% and moved to a separate work area.

This shows how much silica is created when dry cutting.

When dry cutting, the blade should be allowed to cool off periodically.

They can also be used for dry cutting.

Place dry cuttings into a plastic or foil container.

If you do have wormwood - and not many of us grow it because it's poisonous - then dried cuttings will help drive wasps away.

Dry cutting, it may require shallower cuts and allow the blade to run freely every few minutes to let the blade cool.

Shown are the suggested ranges for cutting speeds and feed rates using high speed tool steel under dry cutting conditions at a 0.015 in.

To produce "Envirocat", the clean dry cuttings residue is processed with a proportion of other ingredients then packaged ready for sale.

The conditions are a tool life of 1 hour, dry cutting (no coolant) and at medium feeds so they may appear to be incorrect depending on circumstances.

Allbright's voice had a dry cutting edge - like Gregory Peck in Twelve O'clock High.

However, diamond tools and blades work better when wet, and dry cutting should be limited to situations in which water cannot or should not be used.

If they are used in dry cuttings, the silver solder may melt and the segments can break from the steel core and become a serious safety hazard.

Miracolo Hair Studio prides themselves as one of the only salons outside of Philadelphia that utilizes a "dry cutting method" to style hair.

Capable of cutting brick and masonry into square cuts to a depth of 260mm, the KS26 is particularly suited for indoor use due to its low dust and dry cutting action.

The technique involves the dry cutting with temporary sheathing pipes, of aligned drainage wells, with a diameter of 1200-1500 mm., positioned at an interaxis of 6-8 m., their bottoms linked together to a bottom tube for the discharge of drained water.

If you have to perform dry cutting for some reason (e.g., there is no water source near your work area), you can choose sharper diamond blades, and the dry cutting should be intermittent and shallow (you can do several passes of shallow cuttings to gain a deep cut) to keep the diamond blade cool.