dielectric

The digital antenna is a side mount made by Dielectric and is mounted at 1,200 feet.

No other test can uncover this type of defect as well as the Dielectric Withstand test.

An Artificial Dielectric (video lecture).

Dielectric Withstanding Voltage Test.

These results were later used in development of DRA (Dielectric Resonator Antenna).

'Ferroelectric and Dielectric"'

EAP can have several configurations, but are generally divided in two principal classes: Dielectric and Ionic.

Dielectric refers to a material having electrical insulating properties (e.g., a contact insulator in a connector or the jacketing on a wire).

In electrolytic capacitors the chemical effect is used to produce an extremely thin 'dielectric' or insulating coating, while the electrolyte layer behaves as one capacitor plate.

Figure "DTIRC" (Dielectric Total Internal Reflection Concentrator) on the left shows one such example.

Materials are only dielectric above their corresponding transition temperature T. Dielectric materials have no electric polarisation in the absence of an applied electric field.

Since July 2010, the institute is divided into three categories: Classical Semiconductors, Dielectric and Wide Bandgap Materials, Layers and Nanostructures.

Yeh, C.; Shimabukuro, F. I., The Essence of Dielectric Waveguides, Springer, 2008 ISBN 0-387-49799-4.

A hipot test (also called Dielectric Withstanding Voltage (DWV) test) verifies that the insulation of a product or component is sufficient to protect the operator from electrical shock.

Cure monitoring of Composite materials: Dielectric or Capacitance Sensors are used to measure the electrical response of thermoset resins and matrices of composite materials at specified depth over the sensor surface.

The theory behind the test is that if a deliberate over-application of test voltage does not cause the insulation to break down, the product will be safe to use under normal operating conditions-hence the name, Dielectric Withstanding Voltage test.

A. Valfells, J. P. Verbonceour, and Y. Y. Lau, Space Charge Effects on Multipactor on Dielectric, IEEE Trans.

R. Gerhard-Multhaupt, Less Can Be More - Holes in Polymers lead to a new paradigm of piezoelectric materials for electret transducers, IEEE Transactions on Dielectric and Electrical Insulation, Vol.

Chung is the author of Functional Materials: Electrical, Dielectric, Electromagnetic, Optical and Magnetic Applications (With Companion Solution Manual) in 2010, and of Composite Materials: Science and Applications (2nd Edition) in 2010.

A. G. Petrov, Y. Marinov, S. D'Elia, S. Marino, C. Versace, N. Scaramuzza, Dielectric and flexoelectric oscillations in PDLC studied by flexoelectric spectroscopy and laser light diffraction, J.Optoelec.

In the dielectric, the field will fall off far more slowly.

The behavior of the dielectric now depends on the situation.

Dielectric absorption is a property which has been long known.

However, ice also does not have a high dielectric constant - I think!

Such compounds are often found to have a high dielectric constant.

We have a line charge in front of a dielectric that fills half the space.

In the general case, the dielectric material may be different above and below the central conductor.

The latter is expressed by a number called the dielectric constant.

No such pulse meant that the dielectric must not have held a charge.

The dielectric film never lets any individual electrons all the way through it.

The conductor was printed on both sides of the dielectric.

For these reasons, it is preferred that the liquid be dielectric.

The structure is either hollow or filled with dielectric material.

In the classical approach to the dielectric model, a material is made up of atoms.

SF gas has a much higher dielectric strength than air.

If you want to know something about "dielectric breakdown in water", I think that would be the phrase to research.

So in the future, they had apparently found a material with a nearly infinite dielectric constant!

Below are the expressions for the various fields in a dielectric medium.

The most common dielectric gas is air, due to its ubiquity and low cost.

This is a particular case due to the isotropy of the dielectric.

The dielectric wall is seen as item number 81.

For the real part of the dielectric constant we have:

A dielectric is a material like glass or plastic, that does not conduct electricity.

They had been supplied with something called a "hot plate" and a dielectric oven.

Three families are available, categorized according to their dielectric.