crossbar switch

I have a dream and it's called a crossbar switch.

It's a similar scheme to what is called a "crossbar switch".

Hence the pictures above show a "crossbar switch" using the earlier meaning.

A standard problem in using crossbar switches is that of setting the cross-points.

Engineers also noticed that at any time, each bar of a crossbar switch was only making a single connection.

So we see that the 2x2 crossbar switch is working at 75% efficiency to give out data from input to output.

A third key element will be the router chips controlling the crossbar switches.

These crossbar switches were capable of providing voice service that was comparable to digital switching technology.

The matrix layout of a crossbar switch is also used in some semiconductor memory devices.

Modern "crossbar switches" are usually implemented with semiconductor technology.

Further, large crossbar switches had physical problems.

For example, consider a 2x2 crossbar switch.

The Elite chip was an 8-way link crossbar switch, used to form the packet-switched network.

Claudia pushed down a series of crossbar switches, threw open a red safety cover, and pressed home the firing device.

The processors will be connected with a 96 port, 7 stage non-internally blocking crossbar switch.

A telephony crossbar switch is an electromechanical device for switching telephone calls.

Each stage is made up of a number of crossbar switches (see diagram below), often just called crossbars.

Crossbar switch Describes the switching element of a Clos network.

For example, a crossbar switch requires much more routing than a systolic array with the same gate count.

The crossbar switch itself was simple: exchange design moved all the logical decision-making to the common control elements, which were very reliable as relay sets.

This seemed to imply that most of the switching fabric of a crossbar switch was wasted.

It was introduced January, 1976 in Chicago, Illinois to replace the 4a crossbar switch.

The special crossbar switches used in distributing satellite TV signals are called multiswitches.

Processors may be interconnected using buses, crossbar switches or on-chip mesh networks.

Originally, a crossbar switch consisted literally of crossing metal bars that provided the input and output paths.