countersunk screw

The plate is held to the floor by what must be four countersunk screws.

In most cases, you'll need steel countersunk screws, the old-fashioned kind with a single slot across the head.

Again use countersunk screws and fill the holes but, as the top will be hidden with the tank, a perfect finish is not required.

Mirroring French practice, the armor plates were secured to the ship's hull and deck by countersunk screws.

These sections, which can be 38mm (1½") or more in thickness, are then attached to the walls in question by countersunk screws.

He was using one of the big rusty screwdrivers to scratch the wood-filler from the sockets above the countersunk screws.

Mounting: By countersunk screws or snap-on fit to an adhesive mounting plate.

Drill all the holes, countersinking those on the bed. Make sure that the countersunk screws are below the surface of the bed when assembled.

In tender locos, countersunk screws take the place of buffers in the rear beam.

Fix the angle to the ply backing with countersunk screws and glue so as not to affect the mirror stainless steel on top.

Fix the sheets to ply backing on the concealed folded edges with countersunk screw fixings.

Bed the tiles on mortar and secure them by drilling two holes through to the base and fixing with countersunk screws or bolts.

These will be used to provide enough thickness for a countersunk screw to be used to attach this part of the panel to the firewall.

The original 610 socket was provided with two mounting holes, one behind the receptacle for the plug spigot, and both for countersunk screws.

A handful of countersunk screws and a heavy screwdriver on the heavy table at the end marked where the metal fittings joined the woodwork.

Lightweight and durable, the 3mm thick, hardened Duraluminum chassis balances weight for optimal stability and features countersunk screw holes to avoid hang-ups.

We have also had one motor returned with damaged coils, if the countersunk screws supplied in the kit are used this cannot happen and the same exclusion will apply.

The non-conducting spigot of the original 605 plug was provided with a hole for a countersunk screw, allowing the plug to be fixed in a wall-mounted socket.

The living room is paneled in glowing Honduras mahogany, with bits of polished ebony covering countersunk screws, and the fireplace tiles are inlaid with fragments of colored glass.

The plane was revolutionary for its time and was one of the first planes in history to sport retractable landing gear and special countersunk screws and flat rivets to reduce wind resistance.

The 24-fret neck, this time bolted on by four individually countersunk screws and collars, also uses Canadian maple for construction, topped off with a rosewood fingerboard and those unusual 'white-line' block markers.

Components and Accessories KPG28 Complete Set The mounting of the KPG28 onto a KBM-motor is easy to accomplish, as the motor housing has four threaded holes to match those in the gearbox and these take a Set of four M2 countersunk screws.