cooling channel

The greater the number of cooling channels, the larger the valve needed.

With some cooling channels blocked, they are likely to have hot spots.

The mixed size cooling channel layout is normal within our industry.

The cooling channels are also a permanent feature of the mould.

To achieve this, cooling channels need to be designed close to the molding surface.

C is of very little use in small diameter cooling channels with low pressure differences (below 6 Bar) at the mould.

Debris thrown into the tanks could clog cooling channels, it said.

These gradients will merge together from adjacent cooling channels to form a low temperature area.

Excessively small cooling channel diameters will result in a high pressure (drop delta p.).

Muons pass through the cooling channel one by one.

Salt is deposited onto the cooling channel surfaces.

Also, the beamline must suppress non-muon events from entering the cooling channel.

It is manufactured by forging, rolled into shape, and then the cooling channels are milled.

Lift out cooling channel insert with a screwdriver.

The cylinder walls are thicker and water cooling channels are enhanced to increase flow.

All coolant pressure losses that are external to you molds cooling channels cost your company money in energy and cycle time.

Different diameter and configurations of cooling channels require different flow rates to achieve this goal.

For the average mould cooling channel design a temperature difference between the molding surface and the coolant of over 15 deg.

Cooling channels can be printed to any shape in this process, which lessens time and waste and improves quality.

Specifically a carbon fiber reinforced polymer radiator support that directs cooling channels for various components.

Remove cylinder head, clear cooling channels, skim head, fit a reconditioned distributor.

Ionization cooling channels have been designed for use in a neutrino factory and a muon collider.

The liquid hydrogen is an engine fuel passing CC cooling channels and being introduced into the combustion zones.

The decomposed tetralin clogged several narrow cooling channels used by the sodium to remove heat from the reactor fuel elements.

Fig.2 shows the simple solution of using two, two-way manifolds to split the cooling channels into two cooling zones.