chill roll

This was traditionally done on chill rolls, which produced the soap flakes commonly used in the 1940s and 1950s.

Mostly we supply Chilled Rolls with Chill depth of 20m.m.

Correlate press speed, web dwell time in dryer, and chill roll temperature to optimum performance levels.

It is also possible to vary the placement angle of the auxiliary roll with respect to the chill roll.

Caution: Watch for chill roll condensation.

Lower chill roll temperature.

In film extrusion it generates a static charge to pin the edge of the web to the chill roll to avoid shrinkage during cooling.

Cut thawed or chilled rolls into slices 1/3 inch thick and place on ungreased cookie sheets one inch apart.

Web offset and sheet printing equipment use many rotary unions on the ink vibrator and chill rolls.

Consult oven manufacturer for proper adjustment or adjust web tension.Caution: If chill rolls are too cold, condensation can occur.

Printing on flexible rolls of paper or plastic films requires rotary unions for air or hydraulics, as well as chill rolls for temperature control.

Program Chill Roll Module Simulation and analysis of Chill Rolls.

The manufacturing process begins with a film of molten polyethylene terephthalate (PET) being extruded onto a chill roll, which quenches it into the amorphous state.

CHILL ROLL (ER) Metal roller or drum cooled internally with water, etc.

For products such as plastic sheets or films, cooling is achieved by pulling through a set of cooling rolls (also known as calender or chill rolls), usually 3 or 4 in number.

As the paper leaves the dryer too hot for the folding and cutting that are typically downstream procedures, a set of "chill rolls" positioned after the dryer lowers the paper temperature and sets the ink.

Continuous band replaces stack roll: A novel process for polypropylene film in which the vertical melt curtain is chilled between a seamless steel belt and a chill roll on a horizontal stack is demonstrated by SML.