channel section

Channel sections are used to form the main framework.

Estimate the flow Mach number in the part of the channel section into which objects are placed.

Below is a table of Pultron's most commonly stocked channel sections.

The filter options can be found under the Channel section of the main menu bar:

Artificial riffles were constructed in the concrete lined channel section.

Pultron can manufacture an almost limitless range of channel sections.

Drain channel sections are available at home centers.

The chassis took the form of an "A" with the engine mounted between the channel sections at the narrow front end.

Two lipped channel sections were set face-to-face to form the test specimen assembly.

These data include the irregular channel section geometry and the varying boundary roughness.

Most connections relate to hot-rolled I and channel sections.

With channel section front stiles and angle section rear frame.

Tubular and channel section cross members were bolted to the frame side-members.

The back end of the frame was given a deeper channel section, it now sweeps up over the rear axle.

The advantage of using tubes rather than the previous open channel sections is that they resist torsional forces better.

Front cross member as well as channel section amidships and rear form the frame.

The chassis is of channel section, and is supported upon four semi-elliptic springs.

The V-notch weir is a triangular channel section, used to measure small discharge values.

The new pit was constructed by local ringers using sections of bolted flat and channel section steel.

Three load hangers permit various arrangements of load to be applied to the channel section beam.

To perform hydrographic surveys along the standard Faroe-Shetland Channel sections.

The steel channel section chassis had all-round independent suspension with swing axles at the rear.

The conventionally designed chassis was made of channel section side members suitably braced by cross members.

The channel section steel chassis was placed under the axles with suspension by semi-elliptic leaf springs.

Due to a large fire at Vredestein in Enschede the channel section was closed for weeks to prevent spreading pollution.