bnc connector

It has better performance than the BNC connector at microwave frequencies.

Last nitpick, BNC connectors are not very common in the cable world.

The BNC connector is used for signal connections such as:

Professional BNC connectors for video out and genlock in.

I like the look of BNC connectors.

Passive probes usually connect to the oscilloscope using a BNC connector.

BNC connectors were thus originally made only in 50 ohm versions, for use with any impedance of cable.

They cannot mate with ordinary BNC connectors.

Instead, thin cables end in BNC connectors and computers are attached through T-connectors.

A BNC connector is common for radio and test equipment used up to about 1 GHz.

BNC connectors and higher quality coaxial cable are often used in professional television studios and post-production applications.

BNC connectors exist in 50 and 75 ohm versions, matched for use with cables of the same characteristic impedance.

Adaptors exist to allow some interconnection possibilities between triaxial and BNC connectors.

They help to safely, efficiently and quickly connect and disconnect BNC connectors in jack fields.

The connector on the left in the main picture looks odd, almost like a BNC connector rather than the common F style.

BNC connectors are made to match the characteristic impedance of cable at either 50 ohms or 75 ohms.

The BNC connectors are also very important as are the crimping and cable stripping tools used to install them.

The BNC connector is the antenna connector chosen when the relay is bypassed.

The serial format can be transmitted over 75-ohm coaxial cable with BNC connectors, but there is also a fibre-optical version defined.

The card had several BNC connectors in the rear, which accepted four video input sources and provided two outputs (preview and program).

The output connector from the device is usually a BNC connector and requires a 50 or 75 ohm termination.

BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards.

This model does not have a BNC connector and the serial port is a female DE-9 connector.

Composite monitors usually use RCA jacks or BNC connectors for video input.